
AI Smart Network Gateway | Dòng sản phẩm cổng kết nối AI vi tính biên giới tốc độ cao
Đối tác tham gia dự án là doanh nghiệp công nghệ cao cấp quốc gia, chuyên nghiên cứu và sản xuất thiết bị tính toán AI vi tính biên trong công nghiệp IoT, chủ yếu là cổng AI thông minh và thiết bị đầu cuối tính toán biên công nghiệp. Thiết bị cần thu thập dữ liệu hình ảnh và cảm biến từ dây chuyền sản xuất với tốc độ cao 24/7 và suy luận AI tại chỗ. Thiết bị gốc của khách hàng gặp các vấn đề như mất gói qua cổng mạng, nhiễu điện từ, tích nhiệt chip, suy giảm tín hiệu anten. Công ty chúng tôi cung cấp giải pháp tích hợp hoàn chỉnh các kết nối RJ45/SFP/USB + chống nhiễu/tản nhiệt/che anten, đảm bảo hoạt động AI mạng thông suốt, ổn định và bền bỉ.
Chi tiết dự án
I. Bối cảnh dự án
Doanh nghiệp hợp tác là doanh nghiệp công nghệ cao chuyên về Internet công nghiệp, chuyên về AI edge computing, thu thập dữ liệu sản xuất thông minh, nghiên cứu phát triển hệ thống kết nối công nghiệp, sản phẩm được ứng dụng rộng rãi trong cải tiến thông minh nhà máy, thiết bị IoT, dây chuyền AI kiểm tra thị giác.
Khách hàng thế hệ mới AI thông minh mạng cổng, chịu trách nhiệm toàn bộ nhà máy thiết bị dữ liệu hội tụ, truyền tải video độ phân giải cao, AI phân tích thuật toán biên, liên lạc điện toán đám mây v.v. chức năng cốt lõi. Thiết bị tích hợp nhiều đường thông minh mạng cổng, tần số cao tần số vô tuyến mô-đun và AI tính toán chip, thuộc về điển hình tốc độ cao thông minh mạng + AI biên phần cứng.
Các giải pháp kết nối thông thường và bảo vệ cấu trúc hiện tại không đáp ứng được yêu cầu khắt khe của thiết bị AI về băng thông lớn, độ ổn định cao, khả năng chống nhiễu, và khả năng tính toán liên tục, dẫn đến việc thiết bị thường xuyên gặp phải các vấn đề như độ trễ dữ liệu, AI suy nghĩ giật lag, tín hiệu không ổn định khi hoạt động tại hiện trường.
II. Những điểm nghẽn cốt lõi của khách hàng
RJ45, SFP thông thường không có thiết kế chống nhiễu cao, trong xưởng công nghiệp nhiễu điện từ lớn, dòng dữ liệu tốc độ cao dễ bị mất gói, truyền tải dữ liệu ảnh AI không đầy đủ;
Mạng đa kênh, tần số vô tuyến, chip điện toán hoạt động tập trung, nhiễu xuyên âm điện từ bên trong nghiêm trọng, ảnh hưởng đến độ chính xác tính toán AI và ổn định truyền thông không dây;
Vi xử lý AI hoạt động trong thời gian dài với tải cao, nhiệt độ tích tụ không có cấu trúc tản nhiệt chuyên dụng, thiết bị nóng, giảm tần số, giảm sức mạnh tính toán;
Anten tích hợp không có bảo vệ chuyên nghiệp, lâu dài trong môi trường công nghiệp bụi bẩn, rung động làm suy giảm tín hiệu, kém ổn định;
Thiết bị thuộc hàng công nghiệp về phần cứng AI thông minh, đòi hỏi rất cao về sự đồng nhất, độ tin cậy, khả năng chịu thời tiết của các kết nối, cấu trúc chắn, tản nhiệt.
III. Giải pháp theo yêu cầu
Công ty chúng tôi cung cấp giải pháp trọn gói về thiết bị công nghiệp AI Smart Network với các thiết bị nội địa hóa:
Cổng kết nối tốc độ cao RJ45/SFP/USB với cấu trúc chống nhiễu điện từ, chống lỏng, ổn định nhiệt độ rộng ở cấp công nghiệp, đảm bảo truyền tải đa luồng video HD, dữ liệu cảm biến tốc độ cao, thời gian thực, cung cấp nguồn dữ liệu hoàn chỉnh, liên tục cho thuật toán AI.
Che chắn chính xác chống lại màn hình phân vùng PCB cổng, cách ly mạch thông qua mạng, mô-đun tần số vô tuyến, khu vực tính toán AI, ngăn chặn nhiễu xuyên âm bên trong, nâng cao khả năng chống nhiễu EMC của thiết bị, đảm bảo hoạt động dữ liệu AI chính xác và tín hiệu không dây tinh khiết.
Mặt nạ tản nhiệt Cấu trúc tản nhiệt dẫn nhiệt hiệu quả cao được thiết kế riêng, giải quyết hiệu quả vấn đề tích nhiệt do độ tải cao của chip AI, duy trì tính ổn định của năng lực tính toán thiết bị, ngăn chặn tình trạng giảm tần số do nhiệt độ cao, AI suy luận giật lag.
Vỏ bảo vệ ăng-ten Bọc bảo vệ chuyên dụng tần số vô tuyến điện với độ suy hao thấp, không làm suy giảm tín hiệu, chống bụi, chống va đập, bảo vệ hiệu quả các mô-đun truyền thông không dây, đảm bảo kết nối mạng từ xa, truyền tải dữ liệu biên ổn định cho thiết bị.
IV. KẾT QUẢ CỦA DỰ ÁN
Tốc độ truyền dữ liệu cao của thiết bị giảm thiểu độ trễ xuống dưới 0,01%, AI kiểm tra hình ảnh, phân tích dữ liệu trơn tru và ổn định suốt quá trình;
Vấn đề nhiễu điện từ được giải quyết triệt để, độ chính xác trong thu thập dữ liệu của cổng và độ chính xác trong suy luận của AI được cải thiện đáng kể;
Cấu trúc tản nhiệt kiểm soát nhiệt độ hiệu quả, thiết bị có thể 7×24h không gián đoạn ổn định đầu ra tính toán;
R1: "Đổ đường" phải dịch là offline
Toàn bộ các bộ kết nối + các chi tiết cấu trúc chắn / tản nhiệt / anten đã qua thử nghiệm độ tin cậy của máy, cung cấp hàng loạt dài hạn.
V. Tóm tắt các ví dụ
Toàn bộ giải pháp phần cứng AI Intelligent Network của công ty chúng tôi chuyên dành cho các doanh nghiệp công nghệ cao về Internet công nghiệp, tính toán biên, cổng AI thông minh, thiết bị đầu cuối IoT công nghiệp. Với các sản phẩm kết cấu RJ45, SFP, USB connector & cover, heat sink cover, antenna cover tự nghiên cứu và phát triển, có thể cung cấp cho các thiết bị AI công nghiệp tốc độ truyền thông cao + bảo vệ điện từ + tản nhiệt + bảo vệ ăng-ten một cách tích hợp, hỗ trợ cho sự chuyển đổi công nghiệp thông minh, số hóa, nâng cấp sức mạnh tính toán AI biên.
Sản phẩm liên quan
Sản phẩm liên quan đến dự án

RJ45 2×8 connector
JM8A-CH111DA0Y
RJ45|2×8 |8P8C|Compatible with Cat5e/Cat6 |PCB direct insertion type|Metal shielded shell|Integrated port

RJ45 2×6 connector
JMA-CF190466Y
RJ45|2×6|Shielded|With LED Indicator|Phosphor Bronze Plated with Gold|Wide Temperature Operation|High Density Layout|Through-Hole Mounting|UL94V-0 Flame Retardant|Industrial Grade

RJ45 2×2 connector
JM2-C51A-4510
RJ45 connector | 2x2 | with LED | gold-plated contacts | UL94V-0 flame retardant | wide temperature operation | FCC compliant | phosphor bronze terminals

RJ45 2×8 connector
JM8A-CH15-DA0Y
RJ45 connector | 2x8 ports | shielded | double-layer stacking | phosphor bronze | LED indicator | SUS304 shielding | EMI protection | wide temperature operation

SFP+ single-port cage
SFW11-4101-282N-04C
SFP+ single-port cage | Integrated light guide | Compliant with SFP MSA industry standard | Industrial wide temperature range -40℃~+85℃ | Compatible with switches/routers

USB 3.0 Type A Female Connector
WU30-7B26-D001
USB 3.0 Type A double-layer sink plate female socket | Long DIP body with rear harpoon feet | Nickel-plated shell with gold-plated terminals | Compliant with HSF halogen-free environmental standards | Suitable for industrial control/digital devices

SFP 2×4 cage
SFPW24-2240-F048-01
SFP 2×4 cage connector | with light-guiding arc-shaped spring clip | nickel silver shielded shell | gold-plated terminal | industrial wide temperature range -40℃~+85℃ | compatible with switches/routers

RJ45 1×4 connector
JT4A-2111-GGAM
JT4A-2111-GGAM | 1×4 straight-through shielded RJ45 | V0 flame retardant PBT | metal shielding against EMI | insertion and extraction ≥1000 | each port with green LED | industrial wide temperature | IEC

RJ45 1×2 connector
JM2-CD1N-250S
JM2-CD1N-250S | 1×2 Down-fold RJ45 | V0 Flame Retardant PBT | Gold-plated Contacts | With LED Spring Structure | Industrial Wide Temperature | Brass Shielding Anti-interference

QSFP-DD Cage
SFP12-5146-501A
1x2|With heat sink|With light guide rod|Stainless steel cage|Nickel-plated aluminum heat sink|250 insertion and extraction cycles|48-hour salt spray test

QSFP-DD 1X2 CAGE W/ HEAT SINK
SFP12-5146-500A
QSFP-DD connector | 1x2 cage | with heat sink | industrial-grade wide temperature | EMI shielding | stainless steel | high durability | data center component

RJ45 1×8 connector
JT8A-CF31-5503-1
RJ45 connector | 1×8 | metal shielding | LED indicator light | PA6T flame retardant | SUS304 shell | industrial wide temperature | PCB on-board | EMI | industrial grade

RJ45 single-port connector
FDD-CB40-68D5
RJ45 single-port connector | 1 built-in filter | no LED | industrial-grade reliability | FCC standard | industrial/commercial network equipment

RJ45 single-port connector
JCB-CDD4-C020
RJ45 female socket | network interface | 8P8C connector | network port with LED light | shielded RJ45 socket | DIP-mounted network port

RJ45 single-port connector
JB1W-CG41-3200
RJ45 network interface | 8P8C | semi-shielded | with LED light | no spring clip | industrial-grade network interface

RJ45 1×3 connector
JD3A-0011-00BM
JD3A-0011-00BM | 1×3 Unlit RJ45 | UL94V-0 PBT | 30μ" Gold Plated | Wide Temperature Range -40~85℃ | 5KG Tensile Strength | Dedicated for Industrial Control and Security

RJ45 2×4 connector
JM4W-CG10-381Y
RJ45 Connector | 2x4 Ports | Shielded | No LED | 90-Degree Bend | Gold-Plated Contacts | Industrial Grade | PCB On-Board | Gigabit Ethernet | UL94V-0 Flame Retardant

RJ45 1×2 connector
JT2-C51A-2100
JT2-C51A-2100 | 1×2 Downward Folding Shielded RJ45 | V0 Flame Retardant PBT | Brass Shielding for EMI Resistance | Mating Cycles ≥1000 | Dual-Color LED | Industrial Wide Temperature Range | IEC Standard

RJ45 single-port connector
JT1W-C010-38Y0
JT1W-C010-38Y0 | Single-port unshielded RJ45 | Yellow V0 flame retardant PBT | Insertion and extraction ≥750 times | 2.54mm | Industrial wide temperature range | FCC | Industrial control and security

RJ45 1×8 connector
JT8-CF3182E00
Industrial-grade RJ45 | Industrial wide temperature | Phosphor bronze plated | SUS304 shielded | EC60603-7 standard | LED indicator | High reliability | Protective latch

SFP+ single-port cage
SFW11-4010-370N-01
SFP+ single-port cage | nickel silver shielded shell | compliant with SFP MSA industry standard | gold-plated terminals | industrial wide temperature range -40℃~+85℃ | compatible with switches/routers

SFP+ single-port cage
SFW11-4111-282N-04A
SFP+ single-port cage | Integrated light guide | Compliant with SFP MSA industry standard | Industrial wide temperature range -40℃~+85℃ | Compatible with switches/routers

RJ45 1x4 connector
JT4-EF3582500
RJ45 connector | 1x4 ports | shielded type | with LED, right side green/yellow | 13 pins | high-temperature PA6T material | gold-plated contacts | no rear foot design

RJ45 1x4 connector
JT4-C51U-4600
RJ45 connector |1×4|with LED|EMI shielded|horizontal through-hole

RJ45 single-port connector
JT1-EF3A-2502
JT1-D51A-4510 | Single-port Downward Folding DIP RJ45 | V0 Flame Retardant PBT/PA46 Reflow Solder Type | Mating and Disengagement ≥1000 | Metal Shielding for Anti-interference | With LED | 2.54mm | FCC Certified

RJ45 single-port connector
JT1-D51A-4510
JT1-D51A-4510 | RJ45 single port connector | V0 flame retardant PBT/PA46 reflow soldering version | Plug and unplug ≥ 1000 times | Metal shielding anti-interference | With LED | 2.54mm | FCC certification

RJ45 single-port connector
JT1BW-00B1-00EM
JT1BW-00B1-00EM | RJ45 single port | no LED | blue V0 flame retardant PBT reflow soldering | terminal insertion and extraction ≥1000 times | 2.54mm | automation | FCC certification

RJ45 single-port connector
JT1A-D211-YGJM-1
JT1A-D211-YGJM-1 | RJ45 single port | V0 flame retardant PBT reflow solder type | gold-plated elastic terminal | green and yellow dual-color LED | 2.54mm pitch | FCC standard

RJ45 single-port connector
JT1A-2111-GNAM
JT1A-2111-GNAM | RJ45 Single-Port Connector | V0 Flame Retardant PBT Reflow Soldering | Gold-Plated Flexible Terminal | Green and Orange Dual-Color LED | 3.20mm Pitch | Suitable for Thin Devices | FCC Certified

RJ45 single-port connector
JT1A-2111-GGAM
JT1A-2111-GGAM | RJ45 Single-Port Connector | V0 Flame Retardant PBT Reflow Solder Type | Gold-Plated Flexible Terminal | With LED | Dedicated for Thin Devices | FCC Standard

RJ45 1×2 connector
JS2-C0221210H
JS2-C0221210H | RJ45 1×2 Connector | V0 Flame Retardant PBT, Suitable for Reflow Soldering | Gold-plated Flexible Terminals | With LED Indicator | Industrial Wide Temperature Range, FCC Certified

RJ45 1×4 connector
JM4-CG1G-451S
JM4-CG1G-451S | RJ45 1×4 Connector | V0 Flame Retardant PBT | 6μ" Gold-plated Contacts | Green-amber Dual-color LED | Suitable for Thin Devices | Industrial Wide Temperature Range, FCC Compliant

RJ45 1×2 connector
JM2-CH14-210S
M2-CH14-210S | RJ45 1×2 Connector | V0 Flame Retardant PBT | Gold-plated Contacts | Green and Yellow Dual-color LED | Suitable for Thin Devices | Industrial Wide Temperature Range, FCC Compliant

RJ45 1×5 connector
JD5W-CG2G-00AM
JD5W-CG2G-00AM | RJ45 1×5 Connector | PA46 High Temperature Resistant Reflow Soldering | Dual-color Link Lamp | Metal Shielding Anti-interference | Precision PCB Dimensions | Multi-port Integrated for Industrial Control Gateway

RJ45 single-port connector
JT1-D51A-4510
RJ45 single-port connector | with LED | PBT flame-retardant shell | phosphor bronze gold-plated contacts | industrial-grade wide temperature | FCC compliant | EMI protection

RJ45 single-port connector
FDD-CA4T-48C4-A
RJ45 single-port connector | with LED | metal shielding | industrial-grade network port

RJ45 single-port SMD connector
JB1W-CG70-3001
RJ45 single-port connector | SMD surface mount soldering | no LED | no built-in network transformer | metal shielded shell

RJ45 single-port connector
JB1W-CG40-3201
JB1W-CG40-3201|RJ45 8P8C|Vertical SMT Network Interface Female Socket

USB Type-C female socket (upright type)
WUTC-1642-001R
WUTC-1642-001R|USB Type-C 16Pin|Vertical SMT Waterproof Receptacle|10Gbps High-Speed Transmission

USB-A female socket (with rear fishbone feet)
WU-3041
USB-A female socket | with rear harpoon feet | compliant with RoHS environmental standards | 480Mbps high-speed transmission | compatible with digital industrial control equipment

Micro USB female socket (four-pin full-insertion horn type)
WU-2001
Micro USB 5Pin female socket | Four-pin fully inserted ox horn type | Compliant with USB 2.0 standard | 10,000 insertion and extraction cycles | Suitable for digital/industrial control/automotive devices

USB 2.0 female socket
WU20-4023-D001
WU20-4023-D001 USB 2.0 double-layer 90-degree angled female connector | with double spring | gold-plated terminals | compliant with HSF environmental standards | suitable for PCB board mounting

SFP 1×4 cage
SFW14-4011-282N-01
SFP+ 1×4 cage | Integrated light guide | Compliant with SFP MSA industry standard | Industrial wide temperature range -40℃~+85℃ | Compatible with switches/routers

SFP+ 1×2 cage
SFW12-4011-280N-03
SFP+ 1×2 cage | Compliant with SFP MSA industry standard | Industrial wide temperature range -40℃~+85℃ | Compatible with switches/routers

SFP single-port connector
SFW11-5030-084G-01
SFP single-port connector | Compliant with SFP MSA industry standard | Industrial wide temperature range -40℃~+95℃ | Suitable for switches/routers/fiber optic transceivers

SFP single-port connector
SFW11-5030-064F-01
SFP single-port connector | UL94 V-0 flame-retardant LCP housing | gold-plated phosphor bronze terminals | industrial wide temperature range -40℃~+95℃ | tape packaging | compatible with switches/routers

SFP+ 2×6-port cage
SFPW26-2141-G008-01
SFP+ 2×6 cage | with light-guiding dome | nickel-plated copper shielding shell | gold-plated terminals | industrial wide temperature range -40℃~+85℃ | compatible with switches/routers

SFP+ 2×3 cage
SFPW23-2141-G035-01
SFP+ 2×3 cage | with light-guiding arc shrapnel | white copper shielded shell | gold-plated terminals | industrial wide temperature range -40℃~+85℃ | compatible with switches/routers

SFP+ 2×2 cage
SFPW22-2141-G038-01
SFPW22-2141-G038-01 SFP+ 2×2 Quad-Port Cage | With Light-Guiding Arc Shrapnel | Nickel-Silver Shielded Shell | Gold-Plated Terminals | Industrial Wide Temperature Range -40℃~+85℃ | Compatible with Switches/Servers

SFP+ 2×2 cage
SFPW22-2141-G018-01
SFP+ 2×2 cage | with light-guiding arc shrapnel | white copper shielded shell | gold-plated terminals | industrial wide temperature range -40℃~+85℃ | compatible with switches/servers

SFP+ 2X1 cage (with light guide rod)
SFP21-2140-F210-01
SFP+ 2X1 cage | Compliant with SFP MSA industrial standard | Dual-port compact integrated design | Gold-plated terminals for low-loss transmission | Industrial-grade wide temperature range and anti-interference | Compatible with industrial switches / routers / servers

SFP+ 2×1 cage
SFP21-2040-F230-01
SFP+ 2×1 cage | 15U gold-plated | with light guide | compliant with SFP MSA industrial standard | crimp PCB installation | fully enclosed metal shielding for interference resistance | industrial-grade wide temperature design | compatible with industrial switches / routers / servers

Integrated square heat dissipation and shielding cover
YK587
1060 aluminum alloy | square cavity | high heat dissipation | high shielding | multiple sets of mounting holes | RoHS

shield can
YK577
Shielding case | 0.2mm C7701-1/2H semi-hard white brass | SMT | Automotive electronics/communication PCB | GB/T 30512-2014

shield can
YK450
Electromagnetic shielding cover | 0.2mm C7701-1/2H semi-hard white copper | SMT | Automotive electronics/communication PCB | GB/T 30512-2014

Radiator cover
YK569
Integrated heat dissipation and shielding cover | High thermal conductivity | High heat dissipation | High shielding | Precision drawing and stamping integrated molding | RoHS

Heat dissipating cover
YK625
Square cavity | Multiple mounting holes | High thermal conductivity | High heat dissipation | Anti-oxidation | RoHS

Heat dissipator cover
YK580
Heat sink cover | AL-050-0 | Deburring and deflashing | High thermal conductivity | High heat dissipation | Special-shaped PCB board | RoHS

Heat dissipator cover
YK576
High heat dissipation, high shielding | High thermal conductivity | Long strip-shaped stretching cavity + Multi-point mounting holes + Special-shaped heat dissipation | RoHS | Industrial communication on-board

shield can
YK585
Electromagnetic shielding cover | High conductivity metal | Anti-oxidation | Array-type cooling holes | Folding buckle | High shielding | Good heat dissipation

shield can
YK583
Electromagnetic shielding cover | 0.2mm C7701-1/2H semi-hard white brass | SMT | Automotive electronics/communication PCB | GB/T 30512-2014

Lower shell of radome
CD151-C020-1000
CD151-C020-1000|Laser welding|High light transmittance|Precision mold|Automotive parts|Mitsubishi 5710G30LWB|VDI3400 texture|GB/T14486MT5|Cold runner|Vent film welding

Plastic upper shell of radome
CD143-C020-1000
CD143-C020-1000 | Precision Injection Molding | Optical Transparency | Automotive Components | Black PC/ABS | VDI Etching Pattern | Cold Runner

Upper shell of radome
CD142-C020-2000
CD142-C020-2000|PBT-GF30 |Kumho Sunny LBG678IR|Light transmittance >30% @980nm |VDI3400 frosted pattern|Automotive grade|Precision injection molding|No ejector pin|RoHS compliant

USB AF side-insert female socket
YK-UBML-004F21
USB female socket | metal shielded shell | side insertion | with fixed hanging ear | 480Mbps | industrial grade

USB Type-C female socket
WUTC-1673-VD01
WUTC-1673-VD01|Type-C|16Pin vertical female socket|5A high current|10,000 insertion and extraction cycles

USB Type-C female connector
WUTC-24E2-DS01
USB Type-C 24Pin Sink-type Female Connector | 10Gbps High-speed Transmission | 5A High Current

USB Type-C female socket
WU-3061-30
USB Type-C 6Pin female connector | side insertion | compliant with Type-C 2.0 standard | 3A high current | tens of thousands of insertion and extraction cycles | industrial-grade wide temperature range

Micro USB female socket
WU-3050-40
Micro USB female socket | 10PIN | no post with Mylar | front insertion and rear attachment | industrial grade | 10,000 insertion and extraction cycles | RoHS compliant

USB 2.0 male connector
UG10-5020-3000
UG10-5020-3000 USB 2.0 male connector | nickel-plated SPCC shell | PA6T rubber core | 480Mbps high-speed transmission | RoHS compliant

USB 2.0 male connector
UG10-5010-3000
UG10-5010-3000 USB 2.0 male head | SPCC nickel-plated shell | PA6T high-temperature resistant rubber core | 480Mbps high-speed transmission | RoHS compliant

RJ45 + Dual-Layer USB3.0
FUCW-CB11-C000
FUCW-CB11-C000 Gigabit RJ45 + Dual-Layer USB3.0 Combination Connector | 1000BASE-T Standard Specification | 1 Ethernet Port + 2 USB Ports Integrated Design | Left Yellow and Right Green LED Status Indicators | Gold-Plated Contacts for Stable Transmission | Metal Shielded Housing for Anti-Interference | Wide Temperature Range -20℃~+85℃ | Compatible with Industrial Control Boards / Network Terminals / Communication Devices

RJ45 + Dual-Layer USB3.0
FUCW-CB10-C000
FUCW-CB10-C000 Gigabit RJ45 + Dual-Layer USB3.0 Combined Connector | 1000BASE-T Standard Specification | 1 Ethernet Port + 2 USB Ports Integrated Design | Gold-Plated Contacts for Stable Transmission | Metal Shielded Housing for Anti-Interference | Wide Temperature Range -20℃~+85℃ | Compatible with Industrial Control Boards / Network Terminals / Communication Devices

RJ45+USB2.0
FUBW-CB40-3000
FUBW-CB40-3000 Gigabit RJ45+USB2.0 Combined Connector | 1000BASE-T Standard Specification | 1 Ethernet Port + 1 USB Port Integrated Design | Gold-plated Contacts for Stable Transmission | Metal Shielded Housing for Anti-interference | Wide Temperature Range -25℃~+85℃ | Compatible with Industrial Control Boards / Network Terminals / Communication Devices

RJ45 + dual USB2.0
FUBW-CB1A-48AA
FUBW-CB1A-48AA Gigabit RJ45 + Dual USB2.0 Combination Connector | 1000BASE-T Standard Specification | 1 Ethernet Port + 2 USB Ports Integrated Design | Built-in High-Performance Network Transformer | 2 Green and 2 Yellow LED Status Indicators | Metal Shielded Housing for Anti-Interference | Wide Temperature Range -25℃~+85℃ | Compatible with Industrial Control Boards / Network Terminals / Communication Devices

RJ45 1×2 connector (with LED)
JM1-CA3A1D6OY
RJ45 1x2 Connector | 8P8C Standard Specification | Built-in LED Status Indicator | 10/100/1000Mbps Gigabit Ethernet Transmission | UL94V-0 Flame Retardant Engineering Plastic Housing | Gold-plated Contacts for Stability and Reliability | SUS304 Stainless Steel Metal Shielding Shell | Wide Temperature Range -30℃~+85℃ | Compatible with Industrial Control Boards / Network Terminals / Communication Devices

RJ45 single-port connector (with LED)
JDCA-D4B1-YG1C-1
RJ45 illuminated network interface socket | 8P8C standard specification | built-in dual-color LED indicator | 10/100/1000Mbps Ethernet transmission | high-temperature resistant PA9T flame-retardant halogen-free shell | gold-plated contacts for stability and reliability | SUS304 stainless steel metal shielding shell | wide temperature range -30℃~+85℃ | compatible with laptops / industrial control boards / network terminal devices

RJ45 1×4 connector
JD4A-0011-00AM
RJ45 1×4 connector | 8P8C standard specification | 4-port integrated design | no LED indicator light / no spring structure | PA9T flame-retardant halogen-free shell | SUS304 stainless steel shielding shell | gold-plated contacts for stable conductivity | 500mA / port rated current | wide temperature range -30℃~+85℃ | compatible with industrial control boards / network terminals / communication equipment

RJ45 connector (without LED)
JD1B-DSE0-3000
RJ45 connector | 8P8C universal specification | metal shielded shell | gold-plated contact terminals | flame-retardant halogen-free material | high and low temperature resistance | suitable for industrial control and various network equipment

RJ45 connector (with LED)
JCD-C071-C000
RJ45 Connector | 8P8C Standard Specification | Built-in Dual-color LED Indicator | 10/100/1000Mbps Ethernet Transmission | High-temperature Resistant Engineering Plastic Housing | Gold-plated Contacts for Stability and Reliability | Compatible with Laptops / Industrial Control Boards / Network Terminal Devices

RJ45 single-port connector
JD1A-00H1-00AM
RJ45 single-port connector | Standard 8P8C specification | 90-degree horizontal patch panel design | Compatible with 10/100/1000Mbps Ethernet | High-temperature resistant engineering plastic shell | Gold-plated contacts for high reliability | Compatible with routers / switches / industrial control boards / network terminals

RJ45 single-port connector
JD1B-CA30-D110
RJ45 single-port connector | Sunk panel DIP straight insertion | Full-spring metal shielded shell | No LED | PA6T, UL94-V0 flame retardant | Phosphor bronze, contact area gold plated | 750 insertion and extraction cycles | Netcom equipment PCB sunken network port